+49(0) 3304 522 0808 info@xenia.coffee
Brew group
  • material: chrome-plated brass
  • weight: approx. 3.5 kg
  • can be equipped with 2 heating cartridges (100 or 150 watts)
  • controlled by a thermostat or an optional PT100 sensor
  • water channel with turbulator
  • geometry of the E61 group (shower screen, seal, portafilter)
  • constant heat through the copper thermal bridge
Boiler
  • heat exchanger without standing (overheating) water
  • volume: 1.4 l gross
  • material: wall made of 2 mm stainless steel, flanges made of 5 mm stainless steel
  • pressure-resistant up to at least 8 bar
  • optional boiler insulation: 10 mm needle felt and 2 mm cover made of stainless steel
  • continuous heat exchanger that is emptied after each use (to avoid a cooling flush)
  • drain opening in the bottom closed with a G1/8 stopper
  • heating with 1000–1100 watts
Control Unit
  • control unit with 32-bit processor, Arduino-based
  • 2 mechanical relays, 3 solid state relays
  • onboard power supply (5 V and 12 V)
  • slot for an expansion board
  • installed in a ventilated shaft
  • water level measurement in the tank via a capacitive sensor
General Information
  • improved dual circuit machine (basic version)
  • developed and produced in Germany
  • many freely available standard components are used (from the E61 range)
  • version H: with heating cartridges
  • version D: dual boiler
  • heating-up time of version H/ D: 10–14 minutes (depending on the heating cartridges used)
  • net weight: approx. 24 kg
  • voltage: 230 V/ 50 Hz, alternatively 110 V/ 60 Hz
  • dimensions: width 27 cm, depth 43 cm, height max. 39 cm
  • tank: 2.2 l gross, can be removed from above and optionally to the side
  • Tritan tank
  • largely torsion-free chassis made of 2 mm stainless steel
  • damped vibration pumps
  • rotary pump optional
  • fixed water connection optional
  • optionally steam and water valves with rotary handles or with tilt levers
  • height adjustable feet
  • panels in 1 mm stainless steel: supermirror or in different anodised colours
  • pressure gauge for brewing pressure and boiler (selectable design)
  • logo and symbols in selectable colours
  • 4 status lights in selectable colours
  • optionally different materials for the handles
  • non-contact water level measurement via a capacitive sensor
  • metal toggle switch with optional black cap

Dimensions

  • height with railing: 39 cm
  • height without railing: 35 cm
  • width: 27 cm
  • depth: 43 cm
  • weight: 23–24 kg (depending on the equipment)
en_GBEnglish (UK)

This website uses cookies. If you continue to use the website, we will assume your consent. Further information on data protection

Die Cookie-Einstellungen auf dieser Website sind auf "Cookies zulassen" eingestellt, um das beste Surferlebnis zu ermöglichen. Wenn du diese Website ohne Änderung der Cookie-Einstellungen verwendest oder auf "Akzeptieren" klickst, erklärst du sich damit einverstanden.

Schließen