Valves

Both variants have so-called "noburn" tubes—so they don't get hot that quickly.

Valve Connections

Since the connections for steam and water in the machine are symmetrical, the arrangement of the valves can be chosen.
As a rule, right-handers choose the steam valve on the left side, while left-handers usually get along better with the foaming with a steam valve on the right side.

Steam and Water Knobs

Olive wood has different grains (from calm to wildly mixed up) and colouration. It is possible that after a short time small cracks appear that you can repair yourself. This can happen, for example, due to large temperature differences during transport or tension in the wood. In this case, we can provide you with brief instructions on how to repair it, and in general there will be no further cracks. The stability is usually not endangered, but we ask for a picture in such a case.

First Additional Portafilter

Second Additional Portafilter

This configuration is now binding and will be added to the production list.

Note: Since there is no tick next to 'I hereby place a binding order', this configuration is for your own information only.

With a click on Cancellation Policy you can see the legal regulations. After sending the configuration / order, we look at it, send comments if necessary. If everything is in order, the invoice will follow, to which the terms and conditions, cancellation policy and data protection declaration will be attached again.
Note: The production time shown when you submit the configuration is only an estimate and may vary.

• Shipping Options for Schwitzerland
  

Note on shipping to an address in Switzerland: Due to the customs formalities, we commission a service provider.
The invoice will then be issued immediately without German sales tax, so that a refund no longer has to be made.

For shipping to the German border, there is the option of specifying a different delivery address below.

• Reimbursement of Value Added Tax (Switzerland)
• 
  

With 2x 100 watt cartridges: ≤ 15 (at least 13) minutes. With 2 x 150 watts it is ≤ 12 (at least 9) minutes.

• Boiler Size
  

There are two boiler sizes available.

• Boiler Insulation
  

Consisting of 2 mm stainless steel jacket and 10 mm needle felt. Energy savings of approx. 8-12% and additional protection for the electrical components. The subsequent installation is not feasible at the same cost, as the dismantling of the boiler involves a greater scope of work.

• Brew Group Gasket
  

• Connection to the Water Supply Network
• 
  
• 
  
• The fixed water connection is an option that can be retrofitted at any time.
  

• Pump
• 
  
• Currently only the Ulka EP4 from Ceme is in the range.
  
• 
  
  

• Coffee

If coffee is also ordered with the grinder, we can run in and adjust the grinder to the single basket (of set B) and set it to the type of coffee. This eliminates the tedious and frustrating trying out and wasting of beans when setting the grind of a new grinder for beginners. Smaller adjustments may still be necessary.

Drip Tray Cover

The Xenia is equipped with a reflective drip tray cover as standard. Alternatively there are 3 variants with a coloured coating.

Cup Warmer

The Xenia is equipped with a reflective cup warmer as standard. Alternatively there are 3 variants with a coloured coating. 

Tank Slide-in Module

The tank slide, which can be removed on both sides, could be interesting for you if you should place your Xenia under wall cabinets. The tank can be filled by pulling it out from the side (5-10 cm) or removing it completely. A later retrofitting is unfortunately only associated with a lot of effort and entails high costs. 

Tankeinschub

Der zu beiden Seiten herausnehmbare Tankschlitten erleichtert das Befüllen, beonders wenn man Hängeschränke über der Maschine hat. Eine Befüllung ist durch seitliches Herausziehen (5-10 cm) oder vollständiges Herausnehmen möglich.

The shade of rust on the tank slide may differ slightly from the colour of the panel due to production.

With this option, the tank can be removed from above and from both sides. 

• Manometer
  

This configuration is binding. 
If it is the first configuration, it will shortly be added to the production list. An automatically generated email will follow in a few hours.

This configuration is not binding and is for your information only.

This configuration is hereby the current configuration.
A note: If, for example, the color has been changed, this will not be changed in the public production overview. However, the color change is stored internally in our system.

This configuration is hereby the current configuration. 
A note: If, for example, the color has been changed, this will not be changed in the public production overview. However, the color change is stored internally in our system.